Dustless Vacuum Blasting Machine for Removing Rust Cleaning Paint
Description:
Vacuum Sandblasting Equipment
1. Technologies introduced from overseas, currently the most advanced environmental protection sandblasting equipment in domestic market.
2. Highest processing efficiency among the same type in domestic market.
3. Combining sandblasting, recycling, circulation, separation and dust removal, no dust and no pollution.
4. Working environment reaching GB-103328-10333-89 Health Standard.
5. Automatic feeding, after putting the sucking head into the abrasives, the vacuum pump system will feed automatically.
6. Clean level reaches Sa2-3.
7. Multifunctional, combining the advantages of Open Type, Industrial Sucking Type and Environmental Protection Type.
8. Adopting special control circuit, working pressure adjustable within 0.2Kpa-0.8Kpa, could meet requirements of different sandblasting process.
Specification:
Model: STR-B
Working Power: 380V/50Hz
Air Pressure: 5-7kg/cm2
Gas Consumption: 2-3m3/min(15-22kw)
Motor Power: 4kw
Working Efficiency: 6-10m2/h
Working Radius: rated 10m, max. 20m
Working Form: Automatic Cycle Recovery
Clean Level: Sa2-3
Roughness: About 60μm
Weight: 260kgs
Outer Dimension:1980×830×1900mm
Sand Material Specifications: Above 20-100#(1.0mm-0.04mm)
Key features:
The use of steel abrasive provides cost-effective, efficient and powerful blasting as well as close control of the surface preparation. Easily inter-changeable blast head fittings allow a variety of surfaces to be blasted including: flat, inside and outside corners, small & large diameter pipes etc. Additional accessories are available for specific applications such as to blast large horizontal surfaces or the edges of steel plates.
As the process is safe and dust free other production processes can be carried out close to the blasting operation.
Please check the operating video in our YOUTUBE channel below:
Product Tags:
|
|
Rust Cleaning Paint Vacuum Sandblasting Equipment / Sandblaster Vacuum System Images
|
